Pilz PSENvip RL D P Manual de usuario descargar pdf (Pagina 132)

11.1 Technical details

11 Technical details

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

11-2

The standards valid on 2010-03 apply.

SI_Kennzahlen_PSENvip

Safety characteristic data

Si_Kennzahlen_Erläuterung_1

All the units used within a safety function must be considered when cal-

culating the safety characteristic data.

OSSD/Mute in accordance with EN 61496-1, type 4

Signal level at "0" 0 VDC (-3 V ... 2 V in accordance with EN 61496)

Signal level at "1" UB - 1 VDC (11 V ... 30 V in accordance with EN 61496)

Residual current at "0" signal Max. 1 mA (<2 mA in accordance with EN 61496)

Duration of on and off time during self test 40 µs

Max. cable resistance for detection of shorts between con-

tacts

16 Ohm

Max. capacitive load 20 nF for R

> 48 ohms with rated voltage

Max. inductive load 0.5 H

Transmitter synchronisation

Max. capacitive load 500 nF

Environmental data

Protection type (EN 60529) IP54

Ambient temperature 0 °C … 50 °C

(EN 60068-2-14)

Storage temperature -35 °C … 70 °C

(EN 60068-2-1, EN 60068-2-2)

Climatic suitability 93 % rel. h. at 40 °C

(EN 60068-2-78)

Condensation Not permitted

Vibration Frequency range: 10 Hz … 55 Hz

(EN 60068-2-6) Amplitude: 0.35 mm

20 cycles per axis

Shock

(EN 60068-2-29) 10 g, 16 ms

EMC EN 61000-6-4, EN 61496-1

Mechanical data

Dimensions (H x W x D)

Transmitter 115.5 mm x 112 mm x 168 mm

Receiver 115.5 mm x 112 mm x 228 mm

Weight

Transmitter 1700 g

Receiver 2900 g

Unit Operating mode

EN ISO 13849-1

EN 954-1

Comentarios a estos manuales

Sin comentarios

Pilz PSENvip RL D P Manual de usuario Pagina 132

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Pilz PSENvip RL D P