Pilz PSENvip RL D P Manual de usuario descargar pdf (Pagina 107)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

7-25

7.5 Check protective equipment

7 Commissioning

The test piece interrupts the advance measuring field. The press stroke

is stopped. The upper tool should not touch the test piece.

 Once the press stroke has stopped, push the 15 mm high section of

the test piece beneath the upper tool.

The upper tool should not touch the test piece.

Function test using the 35 mm test piece

 Start up the press.

 Position the 35 mm high section of the test piece on top of the lower

tool.

 Initiate a press stroke.

The test piece interrupts the advance measuring field. The press stroke

is stopped. The upper tool should not touch the test piece.

7.5.2 Visual inspection

Visual inspection7-Inbetriebnahme_Schutzeinrichtung_pruefen_Sichtpruefung

Check the following on the PSENvip transmitter and receiver

 The condition of the installation and attachment

 Any damage on the housing and lens

 Electrical connections

 Switch on the machine.

 Check the messages on the display.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 138 139

Sin comentarios

Pilz PSENvip RL D P Manual de usuario Pagina 107