Pilz PSENvip RL D P Manual de usuario descargar pdf (Pagina 90)

7.2 Initial commissioning

7 Commissioning

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

7-6

7.2.1.4 Align transmitter

Align tran smitter7-Inbetriebnahme_Erstinbetriebnahme_Sender_ausrichten

 Attach an adjustment template with magnets to the upper tool. The tip

of the upper tool must sit in the notch on the stop of the adjustment

template.

Align the alignment grid of the adjustment template to the contour of

the upper tool.

Fig. 7-4: Attach the adjustment template to the transmitter

 The illuminated target area must completely envelop the receiver. If

you hold a white sheet of paper behind the receiver you will be able

to see the contours of the receiver better.

Fig. 7-5: Receiver illuminated by transmitter

 If the illuminated target area does not enclose the receiver as shown

in the diagram, then you will need to realign the transmitter

Align the

alignment grid

on the upper

tool

Centre point of

the upper tool

in the notch on

the back stop

Illuminated target area

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 156 157

Sin comentarios

Pilz PSENvip RL D P Manual de usuario Pagina 90