
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
8-1
8.1 Technical details
8 Technical details
88000Technical detailsTechnical details8-8.1Technical details8100Technical details8-][Technische Daten PSSu seriell(-T) Kompakt
Technical details
Application range Standard
Module's device code 0720h
Support in system environment A no
Support in system environment B yes
from head module ST firmware version 1.0.0
Electrical data
Internal supply voltage (module supply)
Supply voltage range of module supply 4.8 - 5.4 V
Module's current consumption 125 mA
Module's power consumption 0.63 W
Periphery's supply voltage (periphery supply)
Voltage range 16.8 - 30.0 V
Module's current consumption 20 mA
Module's power consumption 0.48 W
Max. power dissipation of the module 1.20 W
Serial interface
Number of RS232 interfaces 1
Transmission rate (configurable) 1.2 kBit/s, 19.2 kBit/s, 2.4 kBit/s, 300 Bit/s, 4.8 kBit/s,
600 Bit/s, 9.6 kBit/s
Max. cable run 15 m
Size of receive buffer 1,023 Byte
Size of send buffer 127 Byte
Potential isolation between interface and Module Supply yes
Potential isolation between interface and Periphery Supply yes
Environmental data
Climatic suitability EN 60068-2-14, EN 60068-2-1, EN 60068-2-2, EN 60068-
2-30, EN 60068-2-78
Ambient temperature in accordance with EN 60068-2-14 0 - 60 °C
Storage temperature in accordance with EN 60068-2-1/-2 -25 - 70 °C
Climatic suitability in accordance with EN 60068-2-30, EN
60068-2-78
93 % r. h. at 40 °C
Condensation not permitted
Max. operating height above sea level 2000 m
EMC EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-
4-5, EN 61000-4-6, EN 61131-2
Vibration to EN 60068-2-6
Frequency 10.0 - 150.0 Hz
Max. acceleration 1g
Shock stress
EN 60068-2-27 15g
11 ms
EN 60068-2-29 10g
16 ms
Protection type in accordance with EN 60529
Mounting (e.g. cabinet) IP54
Housing IP20
Airgap creepage in accordance with EN 61131-2, IEC
60664-1
Overvoltage category II
Pollution degree 2
Comentarios a estos manuales