
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
3-1
3.1 Intended use
3 Safety
33000SafetySafety3-3.1Intended use3100Intended use3-][Gerätebeschreibung ST-Module Sys A + B
The module may be used for standard applications in system environ-
ment A and B.
][Gertebeschreibung ST-Ausgang
The module provides type 1 outputs in accordance with IEC 61131-2. It
may be used to switch:
Resistive loads
Inductive loads
Capacitive loads
Bestimm _Verwend_Zu satz-(T)
The module PSSu E S 2DO 2-T is suitable for use where there are in-
creased environmental requirements (see Technical Details).
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
Any component, technical or electrical modification to the module
Use of the module outside the areas described in this manual
Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Info_PSSu_ab_1.4.0_PAS4000_ab_1.1.1
Bestimm _Verwend_Basi smodule
The PSSu E S 2DO 2 module may be used in conjunction with the fol-
lowing base modules:
Bestimm_Basismodule Digital schmal
PSSu BP 1/8S
PSSu BP 1/8C
PSSu BP-C 1/8S
PSSu BP-C 1/8C
PSSu BP 1/12S
PSSu BP 1/12C
PSSu BP-C1 1/12S
PSSu BP-C1 1/12C
INFORMATION
The module is supported by
PSSuniversal Configurator and PSSuniversal Assistant from
Version 1.4.0
PAS4000 from Version 1.1.1
– We recommend that you always use the latest version
(download from www.pilz.de).
Comentarios a estos manuales