Pilz PDP67 F 8DI ION HP Manual de usuario descargar pdf (Pagina 33)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

9-1

9.1 Technical details

9 Technical details

99000Technical detailsTechnical details9-9.1Technical details9100Technical details9-][Technische Daten_PDP_DI

Technical details

Application range Standard/Failsafe

Electrical data

Internal supply voltage Supply

Supply voltage U

DC 24 V

Voltage tolerance -30 %/+25 %

Power consumption at U

1.2 W

Inputs

Number 8

Input voltage 24 V DC

Input current 3.0 mA

Potential isolation between input and internal bus voltage yes

Outputs (configurable as semiconductor outputs or

test pulse outputs)

Infeed for Load Supply

Voltage 24 V DC

Voltage tolerance -30 %/+25 %

Max. continuous current that the external power supply

must provide

4.0 A

Max. unit fuse protection F1 4 A

Max. unit fuse protection F1 in according with UL508 4 A

Number of positive-switching single-pole semiconductor

outputs

Short circuit-proof yes

Potential isolation between semiconductor output and in-

ternal bus voltage

yes

Potential isolation between semiconductor output and in-

put

Typ. output current at “1” signal and rated voltage of sem-

iconductor output

0.50 A

Permitted current range 0.00 - 0.60 A

Residual current at “0” signal 0.02 mA

Permitted loads inductive, capacitive, resistive

Max. internal voltage drop 200 mV

Terminal voltage when switching off inductive loads -45 V

Number of test pulse outputs 8

Number of outputs that can be configured as test pulses 8

Max. output current at “1” signal 0.50 A

Short circuit-proof yes

Max. cable runs between test pulse output and input 20 m

Hardware processing times

Max. processing time for input when signal changes from

“1” to “0”

1.000 ms

Max. processing time for input when signal changes from

“0” to “1”

1.200 ms

Min. processing time for input when signal changes from

“1” to “0”

0.50 ms

Min. processing time for input when signal changes from

“0” to “1”

0.70 ms

1 2 ... 28 29 30 31 32 33 34 35 36 37

Comentarios a estos manuales

Sin comentarios

Pilz PDP67 F 8DI ION HP Manual de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Pilz PDP67 F 8DI ION HP