Pilz PNOZ msi b4 Box Manual de usuario descargar pdf (Pagina 3)

PNOZ msi b4 Box

Operating Manual PNOZ msi b4 Box

1003058-EN-01

Description

The shielded junction box PNOZ msi b4 Box is used to connect

} An incremental encoder with an additional feed for the encoder supply

} An incremental encoder in conjunction with a proximity switch (dual encoder evaluation)

with an additional supply for the proximity switch

} 2 proximity switches with/without pull resistor with an additional supply for the proximity

switches

to the Pilz speed monitor.

Front view

Installation

} The junction box should be installed in a control cabinet with a protection type of at

least IP54.

} Fit the junction box to a horizontal mounting rail.

} Use the locking slide on the rear of the unit to attach the junction box to a mounting rail.

} In environments exposed to heavy vibration, the unit should be secured using a fixing

element (e.g. retaining bracket or end angle).

} Open the locking slide before lifting the unit from the mounting rail.

} Tighten the cable feeds with an SW 16 mm spanner.

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

Pilz PNOZ msi b4 Box Manual de usuario Pagina 3