Pilz PNOZ ms4p speedcontrol Manual de usuario descargar pdf (Pagina 25)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

7-1

7.1 Messages

7 Operation

77000OperationOperation7-7.1Messages7100Messages7-

When the supply voltage is switched on, the PNOZmulti safety system

copies the configuration from the chip card.

The LEDs "POWER","DIAG", "FAULT", "IFAULT" and "OFAULT" light up

on the base unit.

The PNOZmulti safety system is ready for operation when the "POWER"

and "RUN" LEDs on the base unit and the "READY" LED on the PNOZ

ms4p are lit continuously.

7.2Display elements7200Display elements7-

Key:

7.2.1 Display elements for unit diagnostics

Display elements for unit diagnostics7-

LED on

LED flashes

LED off

LED LED status Key

POWER Supply voltage is present

FAULT External fault leading to a safe condition; the fault is at the incremental encoder in-

puts whose LEDs are flashing, e.g. short across the contacts

Internal fault leading to safe condition

SHAFT Input device or wiring fault

Axis is in the normal range (no standstill, no overspeed)

Axis is signalling standstill

Axis is signalling overspeed

X12 Incremental encoder on terminal X12 is connected correctly

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Sin comentarios

Pilz PNOZ ms4p speedcontrol Manual de usuario Pagina 25