Pilz PNOZ ms3p TTL Manual de usuario descargar pdf (Pagina 34)

9.2 Example with position control

9 Application examples

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

9-4

Depending on the operating mode, evaluation of diagnostic bit 10 can

be implemented in the user program as follows

An additional "Position Control" signal is incorporated. This signal indi-

cates whether the relevant axis is in position control (signal status = 1)

or in operation (signal status = 0).

The time element with configured switch-off delay operates as a start-

up suppressor, as the bit: "Unfeasible or single-channel signal from the

incremental encoder" may still be present for 2 s after leaving standstill.

The connection point "Input Device OK" must be incorporated into the

application and evaluated in such a way that a shutdown occurs if the

connection point "Input Device OK"= 0.

1 2 ... 29 30 31 32 33 34 35

Sin comentarios

Pilz PNOZ ms3p TTL Manual de usuario Pagina 34