
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
8-1
8.1 Technical details
8 Technical Details
88000Technical DetailsTechnical Details8-8.1Technical details8100Technical details8-][Technische Daten_multi_Analogeingangsmodul
Technical details
Electrical data
Supply voltage
Supply voltage U
B
DC 24 V
Voltage tolerance -15 %/+20 %
Power consumption at U
B
DC 2.0 W
Residual ripple DC 5 %
Times
Switch-on delay 5.00 s
Max. reaction time when the input signal changes 100 ms
Supply interruption before de-energisation 20 ms
Inputs
Number of analogue inputs 2
Type of analogue inputs Voltage, Current
Max. measurement error at 25 °C 0.5 %
Temperature coefficient* 0.0025 %/K
Max. measurement error at full temperature range 0.5 %
Greatest transient deviation during el. interference test 1.0 %
Max. measurement error in the case of a potential module
error 1.5 %
Max. voltage between the I0 and I1 inputs during current or
voltage measurement 30 V
Analogue input filter first order, RC filter
Cutoff frequency 80 Hz
Filter time constant 2.0 ms
Galvanic isolation no
Current measurement
Signal range 0.00 - 25.59 mA
Value range 0 - 4095 d
Resolution 12 Bit
Value of least significant bit (LSB) 6.25 µA
Input resistance (current input) 100.000 Ohm
Max. continuous current 50 mA
Voltage measurement
Signal range -10.2400 - 10.2375 V
Value range -4096 - 4095 d
Resolution 13 Bit
Value of least significant bit (LSB) 5 mV
Input resistance (voltage input) 290 kOhm
Max. continuous voltage +/- 30 V
Environmental data
EMC EN 60947-5-1
Vibration to EN 60068-2-6
Frequency 10 - 55 Hz
Amplitude 0.35 mm
Climatic suitability EN 60068-2-1,
EN 60068-2-30, EN 60068-2-78 coated version
Airgap creepage in accordance with EN 60664-1
Ambient temperature 0 - 60 °C
-25 - 60 °C coated version
Climatic suitability 95 % r. F. coated version
Comentarios a estos manuales