Pilz PNOZ ms1p standstill / speed monitor Manual de usuario descargar pdf (Pagina 18)

4.2 Input device types

4 Function description

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

4-2

4.2Input device types4200Input device types4-

4.2.1 Proximity switch

Proximity s witch4-

4.2.1.1 Requirements of the proximity switches

Requiremen ts of the proxim ity switches4-

` Only proximity switches of type "pnp" are allowed to be used (N/O

contact, switching to positive).

` The proximity switches require a 24 VDC supply.

` The proximity switches must be fitted such that at least one is always

activated (provides a high signal).

` The proximity switches must be fitted such that the recorded signals

overlap.

Fig. 4-1: Example proximity switch signal behaviour

` Pay attention to the values in the technical details

4.2.2 Incremental encoders

Incremental encoders4-

4.2.2.1 Requirements of the incremental encoders

Requirements of the incremental encoders4-

` Only incremental encoders with a differential output of the following

type are permitted

– Sin/Cos

– TTL (RS 422)

` Please note the values stated in the technical details

CAUTION!

Appropriate installation measures should be taken to prevent a

foreign body coming between the signal input device and the

proximity switch. The foreign body could cause one of the prox-

imity switches to be constantly energised (constant high signal).

Proximity switch 1

Proximity switch 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 42 43

Sin comentarios

Pilz PNOZ ms1p standstill / speed monitor Manual de usuario Pagina 18